Build a Gang-sheet

$3.00 USD

Sale Sold out

Quantity

Build My Gang Sheet

Heat Press Instructions (Recommended):

1. Pressure Setting

Set the heat press to medium to firm pressure.

2. Temperature

For cotton and 50/50 blends, set the temperature to 320-350F°.

For synthetic or polyester fabrics, set the temperature to 280-300F°.

3. Press

Press the transfer to fabric for 12 seconds.

4. Peel

Peel your DTF Transfer Sheet while still warm in one smooth motion.

(Cold peeling also works!)

5. Second Press:

After peeling the film off, cover the image with parchment paper and press again for 5 seconds.

Iron On:

1. Temperature:

Set the temperature to the highest temperature setting on your iron.

(Best around 300F°.)

2. Press:

Apply even pressure to all of the design with the iron and press evenly for 15-25 seconds onto the garment.

3. Peel

Peel your DTF Transfer Sheet while still warm in one motion. **May need to increase pressure if the transfer film is not peeling.

(Cold peeling also works!)